TLP714F中文資料東芝數(shù)據(jù)手冊(cè)PDF規(guī)格書

General

The TLP714F is a photocoupler in a 6-pin SDIP package that consists of a GaA?As infrared light-emitting diode (LED) optically coupled to an integrated high-gain, high-speed photodetector IC chip. It provides guaranteed performance and specifications at temperatures up to 125°C. The TLP714F is physically smaller than the one in an 8-pin DIP package and compliant with international safety standards for reinforced insulation. It thus provides a smaller footprint solution for applications that require safety standard certification. An internal noise shield provides a guaranteed commonmode transient immunity of ±20 kV/μs. The TLP714F guarantees minimum and maximum of propagation delay time, pulse width distortion. Therefore it is suitable for isolation interface between IPM and control IC circuits in motor control application. Leads of the TLP714F is bend to satisfy 8 mm PC board spacing requirements. Absolute maximum ratings and electrical characteristics are the same as in the TLP714.

Features

(1) Inverter logic type (open collector output)

(2) Package: SDIP6

(3) Operating temperature: -40 to 125°C

(4) Supply voltage: -0.5 to 30 V

(5) Threshold input current: 5.0 mA (max)

(6) Supply current: 1.3 mA (max)

(7) Propagation delay time: tpHL = 400 ns (max), tpLH = 550 ns (max)

(8) Pulse width distortion: |tpHL - tpLH| = 400 ns (max)

(9) Common-mode transient immunity: ±20 kV/μs (min)

(10) Isolation voltage: 5000 Vrms (min)

(11) Safety standards

UL-approved: UL1577, File No.E67349

cUL-approved: CSA Component Acceptance Service No.5A File No.E67349

VDE-approved: EN60747-5-5 (Note 1)

Applications

? Intelligent Power Module Signal Isolation

? Factory Automation (FA)

? Industrial Inverters