General Description

FNA40560 is a Motion SPM? 45 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the modules robust short-circuit-rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.

Features

? UL Certified No. E209204 (UL1557)

? 600 V - 5 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection

? Low Thermal Resistance Using Ceramic Substrate

? Low-Loss, Short-Circuit Rated IGBTs

? Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout

? Built-In NTC Thermistor for Temperature Monitoring

? Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing

? Single-Grounded Power Supply

? Optimized for 5 kHz Switching Frequency

? Isolation Rating: 2000 Vrms / min.

Applications

? Motion Control - Home Appliance / Industrial Motor

FNA40560屬于分立半導體產品 > 功率驅動器模塊。安森美半導體公司制造生產的FNA40560功率驅動器模塊功率驅動器模塊為電源組件（通常為半橋或單相、兩相或三相配置的 IGBT 和 MOSFET）提供物理防護。功率半導體或裸片將焊接或燒結在基材上，后者可承載功率半導體并在需要時提供電和熱觸點以及電絕緣。功率模塊提供更高的功率密度，并且在許多情況下更可靠且更易于冷卻。