FNA25060分立半導體產品的功率驅動器模塊規格書PDF中文資料

FNA25060屬于分立半導體產品的功率驅動器模塊。由安森美半導體公司制造生產的FNA25060功率驅動器模塊功率驅動器模塊為電源組件（通常為半橋或單相、兩相或三相配置的 IGBT 和 MOSFET）提供物理防護。功率半導體或裸片將焊接或燒結在基材上，后者可承載功率半導體并在需要時提供電和熱觸點以及電絕緣。功率模塊提供更高的功率密度，并且在許多情況下更可靠且更易于冷卻。

General Description

The FNA25060 is a Motion SPM 2 module providing

a fully?featured, high?performance inverter output stage for AC

induction, BLDC, and PMSM motors. These modules integrate

optimized gate drive of the built?in IGBTs to minimize EMI and

losses, while also providing multiple on?module protection features:

under?voltage lockouts, over?current shutdown, temperature sensing,

and fault reporting. The built?in, high?speed HVIC requires only

a single supply voltage and translates the incoming logic?level gate

inputs to high?voltage, high?current drive signals to properly drive the

module’s internal IGBTs. Separate negative IGBT terminals are

available for each phase to support the widest variety of control

algorithms.

Features

? UL Certified No. E209204 (UL1557)

? 600 V ? 50 A 3?Phase IGBT Inverter, Including Control ICs for

Gate Drive and Protections

? Low?Loss, Short?Circuit?Rated IGBTs

? Very Low Thermal Resistance Using Al2O3 DBC Substrate

? Built?In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB

Layout

? Separate Open?Emitter Pins from Low?Side IGBTs for Three?Phase

Current Sensing

? Single?Grounded Power Supply Supported

? Built?In NTC Thermistor for Temperature Monitoring and

Management

? Adjustable Over?Current Protection via Integrated Sense?IGBTs

? Isolation Rating of 2500 Vrms / 1 min.

? This Device is Pb?Free, Halogen Free/BFR Free and is RoHS

Compliant

Applications

? Motion Control ? Industrial Motor (AC 200 V Class)