ZL8802ALAFTK集成電路（IC）的PMIC-穩壓器-DCDC開關式控制器規格書PDF中文資料

The ZL8802 is a dual output or dual phase digital DC/DC

controller. Each output can operate independently or be used

together in a dual phase configuration for high current

applications supporting 2-, 4-, 6- and 8-phase operation with

up to four ZL8802s.

The ZL8802 supports a wide range of output voltages

(0.54V to 5.5V) operating from input voltages as low as 4.5V

up to 14V.

With the fully digital ChargeMode control, the ZL8802 will

respond to a transient load step within a single switching cycle.

This unique compensation-free modulation technique allows

designs to meet transient specifications with minimum output

capacitance, thus saving cost and board space.

Intersil’s proprietary single-wire DDC (Digital-DC?) serial bus

enables the ZL8802 to communicate between other Intersil

digital power ICs. By using the DDC, the ZL8802 achieves

complex functions such as inter-IC phase current balancing,

sequencing and fault spreading. This eliminates complicated

power supply managers with numerous external discrete

components.

The ZL8802 features fast output overcurrent protection. The

input voltage, output voltages and DrMOS/MOSFET driver

supply voltages are overvoltage and undervoltage protected.

Two external and one internal temperature sensors are

available for temperature monitoring, one of which can be

configured for under- and over-temperature protection. A

snapshot parametric capture feature allows users to take a

snapshot of operating and fault data during normal or fault

conditions.

Integrated Low Dropout (LDO) regulators allow the ZL8802 to

operate from a single input supply eliminating the need for

additional linear regulators. The VDRV LDO output can be used

to power external drivers or DrMOS devices.

With full PMBus? compliance, the ZL8802 is capable of

measuring and reporting input voltage, input current, output

voltage, output current as well as the device’s internal

temperature, 2 external temperatures and an auxiliary voltage

or temperature input.

Features

? Unique compensation-free design – always stable

? Output voltage range: 0.54V to 5.5V

? Input voltage range: 4.5V to 14V

? 1 output voltage accuracy over line, load and temperature

? ChargeMode control achieves fast transient response,

reduced output capacitance and provides output stability

without compensation.

? 2-channel output, 2-, 4-, 6- or 8-phase output with 2, 3 or 4

devices

? Switching frequency range 200kHz to 1.33MHz

? Proprietary single-wire DDC (Digital-DC) serial bus enables

voltage sequencing and fault spreading with other Intersil

digital power ICs

? Inductor peak and averaged over and undercurrent

protection

? Digital fault protection for output voltage UV/OV, input

voltage UV/OV, temperature and MOSFET driver voltage

? Accurate average output current measurement with

adjustable gain settings for sensing with SPS current

monitor outputs or high current, low DCR inductors

? Monitor ADC measures input voltage, input current, output

voltage, driver voltage, internal and external temperature

? Nonvolatile memory for storing operating parameters and

fault events

? PMBus? compliant

Applications

? Servers/storage equipment

? Telecom/datacom equipment

? Power supplies (memory, DSP, ASIC, FPGA)