VN9004AJTR中文資料意法半導體數據手冊PDF規格書

Description

The device is a single channel high-side driver manufactured using ST proprietary

VIPower M0-9 technology and housed in a PowerSSO-16 package. The device is

designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOScompatible

interface, providing protection and diagnostics.

The device integrates advanced protective functions such as load current limitation,

overload active management by power limitation and overtemperature shutdown with

configurable latch-off.

A FaultRST pin unlatches the output in case of fault or disables the latch-off

functionality.

A dedicated multifunction multiplexed analog output pin delivers sophisticated

diagnostic functions including high precision proportional load current sense, supply

voltage feedback and chip temperature sense, in addition to the detection of overload

and short circuit to ground, short to VCC and OFF-state open-load.

Features

? AEC-Q100 qualified

? Extreme low voltage operation for deep cold cranking applications (compliant

with LV124, revision 2013)

? General

– Single channel smart high-side driver with current sense analog feedback

– Very low standby current

– Compatible with 3 V and 5 V CMOS outputs

? Current sense diagnostic functions

– Multiplexed analog feedback of: load current with high precision

proportional current mirror

– Overload and short to ground (power limitation) indication

– Thermal shutdown indication

– OFF-state open-load detection (with external pull-up)

– Output short to VCC detection

– Sense enable/disable

? Protections

– Undervoltage shutdown

– Overvoltage clamp

– Load current limitation

– Self limiting of fast thermal transients

– Configurable latch-off on overtemperature or power limitation with

dedicated fault reset pin

– Loss of ground and loss of VCC

– Reverse battery through self turn-on

– Electrostatic discharge protection

Applications

? Specially intended for Automotive smart power distribution

? Glow plugs, heating systems, DC motors, relay replacement and high power

resistive and inductive actuators