UPD168113K9-9B4-A中文資料瑞薩數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION

The μ PD168113 is a serial control 7-channel H-bridge driver that consists of a CMOS controller and a MOS output stage. It can reduce the current consumption and the voltage loss at the output stage compared with a conventional driver using bipolar transistors, thanks to employment of a MOS process. The μ PD168113 can drive various motor coils by controlling the serial, so that the number of signal lines necessary for controlling the motor can be decreased.

The package is a 56-pin WQFN that helps reduce the mounting area and height.

The μ PD168113 can be used to drive two stepping motors, or two DC motors and one coil.

FEATURES

? Seven H-bridge circuits employing power MOS FET

? Low-voltage driving

VDD = 2.7 to 3.6 V

VM = 2.7 to 5.5 V

? Output on-state resistance: 1.0 ? TYP., 1.5 ? MAX. (sum of top and bottom stage)

? Output current

DC current: 0.4 A/ch (when each channel is used independently)

Peak current: 0.7 A/ch (when each channel is used independently)

DC current: 0.5 A/ch (when used independently)

Peak current: 0.7 A/ch (when used independently)

? Input logic frequency: 6 MHz supported

? Undervoltage lockout circuit

Shuts down the internal circuit at VDD = 1.7 V TYP.

? Overheat protection circuit

Operates at 150°C or more and shuts down internal circuitry.

? 56-pin WQFN (□8 mm, 0.5 mm pitch)