TUSB211A中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Wide supply voltage range: 2.3 – 6.5 V

? Ultra-low USB disconnect and shutdown power

consumption

? Provides USB 2.0 high-speed signal conditioning

? Compatible with USB 2.0, OTG 2.0, and BC 1.2

? Support for low-speed, full-speed, and high-speed

signaling

? Host or device agnostic

? Supports up to 5-m cable length

– Four selectable signal EQ (edge boost along

with DC boost) settings through the external

pull-down resistor values

? Supports up to 10-m cable length with two

TUSB211A devices

? Scalable solution – devices can be daisy chained

for high loss applications

? Pin compatible with TUSB211, 212, 214, 216, and

217A (3.3 V)

2 Applications

? Laptop, desktop or docking stations

? Portable electronics

? Tablets

? Cell phones

? Televisions

? Active cable, cable extenders, backplane

3 Description

The TUSB211A is a third-generation USB 2.0 highspeed

signal conditioner designed to compensate

both AC loss (due to capacitive load) and DC loss

(due to resistive loss) in the transmission channel.

The TUSB211A leverages a patented design to

speed-up transition edges of USB 2.0 high-speed

signal with an edge booster and increases static

levels with a DC boost function.

In addition, the TUSB211A includes a pre-equalization

function to compensate the inter-symbol interference

(ISI) jitter in application with longer cable length. USB

low-speed and full-speed signal characteristics are

unaffected by the TUSB211A.

The TUSB211A improves signal quality without

altering packet timing or adding propagation delay or

latency.

The TUSB211A helps a system to pass the USB 2.0

high-speed near end eye compliance with a cable as

long as 5 meters.

The TUSB211A is compatible with USB On-The-Go

(OTG) and Battery Charging (BC) protocols.