1 Features

1? Qualified for Automotive Applications

– Automotive Grade 1 (Q-temperature Range)

– Device HBM ESD Classification Level H2

– Device CDM ESD Classification Level C4B

? 24-V Maximum Input Voltage

? Low 3.2-μA Quiescent Current at 50 mA

? Stable With Any Capacitor (> 0.47 μF)

? 50-mA Low-Dropout Regulator

? Available in 2.5 V, 3 V, 3.3 V, 5 V, and Adjustable

(1.2 V to 15 V)

? Minimum and Maximum Specified Current Limit

? 5-Pin SC70 and SOT (DCK) Package

? –40°C to 125°C Specified Junction Temperature

Range

2 Applications

? Ultra-Low-Power Microcontrollers

? Cellular and Cordless Handsets

? Portable- and Battery-Powered Equipment

3 Description

The TPS715xx-Q1 low-dropout (LDO) voltage

regulators offer the benefits of high input voltage,

LDO voltage, low-power operation, and miniaturized

packaging. The devices, which operate over an input

range of 2.5 V to 24 V, are stable with any capacitor

(>0.47 μF). The LDO voltage and low quiescent

current allow operations at extremely low power

levels. Therefore, the devices are ideal for powering

battery-management ICs. Specifically, since the

devices are enabled as soon as the applied voltage

reaches the minimum input voltage, the output is

quickly available to power continuously operating

battery-charging ICs.

The usual PNP pass transistor has been replaced by

a PMOS pass element. Because the PMOS pass

element behaves as a low-value resistor, the LDO

voltage, typically 415 mV at 50 mA of load current, is

directly proportional to the load current. The low

quiescent current (3.2 μA typical) is stable over the

entire range of output load current (0 mA to 50 mA).

TPS715屬于集成電路（IC） > 線性 + 開關穩壓器。美國德州儀器公司制造生產的TPS715穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。