TPS35集成電路（IC）的監控器規格書PDF中文資料

TPS35屬于集成電路（IC）的監控器。由德州儀器制造生產的TPS35監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。

1 Features

? AEC-Q100 qualified with the following results:

– Device temperature grade 1: –40°C to 125°C

ambient operating temperature range

? Factory programmed or user-programmable

watchdog timeout

– ±10 Accurate timer (maximum)

– Factory programmed: 1 msec to 100 sec

? Factory programmed or user-programmable reset

delay

– ±10 Accurate timer (maximum)

– Factory programmed option: 2 msec to 10 sec

? Input voltage range: VDD = 1.04 V to 6.0 V

? Fixed threshold voltage (VIT-): 1.05 V to 5.4 V

– Threshold voltage available in 50 mV steps

– 1.2 Voltage threshold accuracy (maximum)

– Built-in hysteresis (VHYS): 5 (typical)

? Ultra low supply current: IDD = 250 nA (typical)

? Open-drain, push-pull; active-low outputs

? Various programmability options:

– Watchdog enable-disable

– Watchdog startup delay: no delay to 10 sec

– On the fly timer extension: 1X to 256X

– Latched output option

? MR functionality support

2 Applications

? On-board (OBC) and wireless charger

? Driver monitoring

? Battery Management System (BMS)

? Front camera

? Surround view system ECU

3 Description

The TPS35-Q1 is an ultra-low power consumption

(250 nA typical) device offering a precision voltage

supervisor with a programmable timeout watchdog

timer. The TPS35-Q1 supports wide threshold levels

for undervoltage supervision with 1.2 accuracy

across the specified temperature range.

The TPS35-Q1 offers a high accuracy timeout

watchdog timer with a host of features for a wide

variety of applications. The timeout watchdog timer

can be factory programmed or user programmed

using an external capacitor. The timer value can be

changed on-the-fly using a combination of logic pins.

The watchdog also offers unique features such as

enable-disable, start-up delay, independent WDO pin

option.

The RESET or WDO delay can be set by factoryprogrammed

default delay settings or programmed by

an external capacitor. The device also offers a latched

output operation where the output is latched until the

supervisor or watchdog fault is cleared.

The TPS35-Q1 provides a performance upgrade

alternative to TPS3851-Q1 device family. The TPS35-

Q1 is available in a small 8-pin SOT-23 package.