TDES9640RURT中文資料德州儀器數據手冊PDF規格書

1 Features

? Quad 7.55 Gbps deserializer hub aggregates data

from up to 4 sensors simultaneously

– Supports 8MP+ imagers

– Single-ended coaxial or shielded twisted-pair

(STP) cable

– Power-over-coax (PoC) support

? Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and

1.8875 Gbps

? CSI v2.1 compliant system interface

? Supports up to 2 MIPI CSI-2 output ports and 1

replication port

– CSI Port 0: MIPI CSI-2 output port

– CSI Port 1: MIPI CSI-2 output port

– CSI Port 2: replication port (D-PHY only)

– 16 Virtual channels and VC-ID remapping

– MIPI D-PHY and C-PHY configurable

? MIPI D-PHY v2.1 compatible

– Up to 4 data lanes with 2 clocks per port

– Up to 2.5 Gbps per lane, 10 Gbps per port

? MIPI C-PHY v1.1 compatible

– Up to 4 trios per port

– Up to 5.7 Gbps per trio, 22.8 Gbps per port

? Quad CMLOUT output ports for off-board

processing

– 4 x CMLOUT ports replicated from 4 x V3Link

RX ports

– Capable of driving another deserializer at the

same line rate

? 10 GPIO pins for sensor synchronization and

diagnostics

? Dual I2C ports

? Frozen frame detection

? Automatic receiver equalization

? Compatible with TSER9615, TSER953, and with

the TSER4905 (when used in Enhanced Vision

mode)

? Low power sleep mode with GPIO-state retention

? Wide temperature range: -20°C to 85°C

2 Applications

? Appliances

? Video Surveillance

? Elevators and Escalators

? Industrial Robots

? Machine Vision

? Patient Monitoring and Diagnostics

? Imaging

3 Description

The TDES9640 is a V3Link Enhanced Vision

deserializer that delivers robust ultra-high-speed 7.55

Gbps forward channel and 47.1875 Mbps bidirectional

control channel for connecting up to 4 data sensors

to the processing unit over a coaxial or STP cable.

When paired with the TSER9615 or the TSER4905

serializers, the TDES9640 receives video data from

image sensors or video sources supporting ultra-high

resolutions or multiple sensors in various topologies.

Data is received and aggregated into two MIPI

CSI-2 D-PHY or C-PHY outputs for interfacing with

a downstream processor. An additional CSI port is

used for port replication in D-PHY mode only. The

flexible MIPI CSI-2 outputs support multiple virtual

channels interleaving per port to differentiate multiple

sensors, exposures, and data types. This functionality

features video aggregation and replication modes and

supports input-to-output port as well as virtual channel

(VC-ID) remapping.

The TDES9640 supports advanced data protection

and diagnostic features, as well as multiple levels of

data integrity checking and protection in conjunction

with programmable health status interrupt, which

helps achieve robust sensor module and link

operation in the end application.