STLM75傳感器變送器的溫度傳感器-模擬數字輸出規格書PDF中文資料

STLM75屬于傳感器變送器的溫度傳感器-模擬數字輸出。由意法半導體集團制造生產的STLM75溫度傳感器 - 模擬和數字輸出模擬和數字輸出溫度傳感器可用于測量環境熱能量。特征包括傳感器類型、本地感測溫度、遠程感測溫度、輸出類型、電源電壓和分辨率。傳感器類型為模擬本地/遠程/紅外、模擬數字、本地/遠程、數字本地/遠程/紅外或內部，感應溫度范圍為 -55°C 至 200°C。

Description

The STLM75 is a high-precision digital CMOS temperature sensor IC with a sigma-delta temperature-to-digital converter and an I2C-compatible serial digital interface (see Figure 1 on page 7). It is targeted for general applications such as personal computers, system thermal management, electronics equipment, and industrial controllers, and is packaged in the industry standard 8-lead TSSOP and SO8 packages.

The device contains a band gap temperature sensor and 9-bit ADC which monitor and digitize the temperature to a resolution up to 0.5°C. The STLM75 is typically accurate to (±3°C - max) over the full temperature measurement range of –55°C to 125°C with ±2°C accuracy in the –25°C to +100°C range. The STLM75 is pin-for-pin and software compatible with the LM75B.

Features

■ Measures temperatures from –55°C to +125°C (–67°F to +257°F)

– ±2°C accuracy from –25°C to +100°C (max)

■ Low operating current: 125 μA (typ)

■ No external components required

■ 2-wire I2C/SMBus-compatible serial interface

– Supports bus time-out feature

– Selectable bus address allows connection of up to eight devices on the bus

■ Wide power supply range-operating voltage range: 2.7 V to 5.5 V

■ Conversion time is 150 ms (max)

■ Programmable temperature threshold and hysteresis set points

■ Pin- and software-compatible with LM75 (drop in replacement)

■ Power-up defaults permit standalone operation as a thermostat

■ Shutdown mode to minimize power consumption

■ Output pin (open drain) can be configured for interrupt or comparator/thermostat mode (dual purpose event pin)

■ Packages:

– SO8

– MSOP8 (TSSOP8)