STEVAL-ISA126V1開發板套件編程器的評估板-DC/DC與AC/DC（離線）SMPS規格書PDF中文資料

STEVAL-ISA126V1屬于開發板套件編程器的評估板-DC/DC與AC/DC（離線）SMPS。由意法半導體集團制造生產的STEVAL-ISA126V1評估板 - DC/DC 與 AC/DC（離線）SMPS該系列產品提供了一種方便的方法，可對開關模式電源轉換所用的器件（包括 DC-DC 和 AC-DC 型）進行性能或特性評估。“穩壓器”（包含內部電源開關裝置）和“控制器”（設計為控制外部電源開關）之類的器件均包括在內。

Description

This document describes a 5 V-2 A application

with 3.3 A peak current capability for 1.9 sec,

using VIPer28H, a new off-line high voltage

converter from STMicroelectronics.

In some applications an SMPS, normally

supposed to deliver a certain amount of power,

from time to time undergoes load peaks that can

be even two or more times as much, but only for

a time interval which is short if compared to the

thermal time constants of the power components.

Typical examples of such loads are printers and

audio systems.

In these cases, it is more cost-effective to

thermally design the system for the maximum

continuous power and not for the peak power

demand, which will be sustained only for a limited

time window.

Such a design is possible thanks to the EPT

function of VIPER28H, which allows the designer

to fix the maximum time window during which the

converter is able to manage the peak power still

maintaining output voltage regulation. If the

overload lasts more than this time window, the

converter is automatically shut down in autorestart mode, in order to avoid the damaging of

the power components.

Features

? Input Voltage range: 90 VRMS to 265 VRMS

? Output Voltage: 5 V

? Max Output Current: IOUTmax 2 A

? Peak Output Current: IOUTpk 3 A

? Precision of output regulation: ΔVOUT_LF ±5

? High Frequency output Voltage ripple:

ΔVOUT_HF 50 mV

? Max ambient operating temperature: TA 60

oC

? 800 V avalanche rugged power section

? PWM operation , at 115 kHz with frequency

jittering for lower EMI

? Limiting current with adjustable set point

? On-board soft-start

? Safe auto-restart after a fault condition, low

stand-by power (< 50 mW at 265 Vac)

? Adjustable and accurate over voltage

protection, thermal shutdown with

hysteresis, delayed overload protection

? RoHS compliant