Features

? DisplayPort? (dual mode) transmitter

– DP 1.2a compliant

– Link rate HBR2/HBR/RBR

– 1, 2, or 4 lanes

– AUX CH 1 Mbps

– Supports eDP operation

– HDMI / DVI operation with level translator

? HDMI 1.4 receiver

– Link rate up to 2.97 Gbps/data pair

– Color depth up to 48 bits

– 3D video timings

– CEC

? SPDIF audio output

? HDCP repeater with embedded keys

? ASSR–eDP display authentication option

? I2C to AUX bridge for EDID/MCCS pass

through

? Device configuration options

– SPI Flash

– I2C host interface

? Spread spectrum on DisplayPort interface for EMI

reduction

? Deep color support

– RGB/YCC (4:4:4) – 16-bit color

– YCC (4:2:2) – 16-bit color

– Color space conversion – YUV to RGB and RGB

to YUV

? Bandwidth

– Video resolution up to 4K x 2K @ 30 Hz; 1920 x

1080 @ 120 Hz

– Audio 7.1 Ch up to 192 kHz sample rate

? Low power operation; active 450 mW, standby 21

mW

? Package

– 81 LFBGA (8 x 8 mm)

? Power supply voltages

– 3.3 V I/O; 1.2 V core

Applications

? Audio-video accessory (dongle) for PC/notebooks

and docking stations

1. Description

The STDP2600 is a high-speed HDMI to DisplayPort converter IC targeted for applications such as audiovideo

accessories, docking stations, notebook motherboard designs, etc. This device includes an HDMI 1.4

compliant receiver and a VESA DP Standard Ver. 1.2a compliant dual mode transmitter, implementing a

single link DisplayPort output port comprising four Main lanes, AUX CH, and HPD.

The STDP2600 uses Kinetic’s latest generation DisplayPort dual mode transmitter technology that supports

both DisplayPort and TMDS signal formats (DP++). DisplayPort transmitter supports HBR2 speed, a data

rate of 5.4 Gbps per lane with a total bandwidth of 21.6 Gbps link rate. The transmitter is also capable of

supporting HDMI or single link DVI output through a passive level translator (dongle). The HDMI receiver unit

supports link rate up to 2.97 Gbps that corresponds to a pixel rate of 297 MHz, adequate for handling video

timings up to FHD 120 Hz 3D formats. This device delivers deep color video up to 16-bits per color at 1080p

60 Hz and lower video resolutions. STDP2600 allows audio transport from the source to desired audio

rendering devices over the DP++ output or through the SPDIF port. The audio signal from the source can be

routed simultaneously to DP++ and SPDIF output ports. For example, STDP2600 allows routing of any two

audio channels on the SPDIF port, while transporting up to eight channels on the DP++ port.

The STDP2600 supports RGB and YCbCr colorimetric formats with color depth of 16, 12, 10, and 8 bits.

This device features HDCP 1.3 content protection scheme with an embedded key option for secure

transmission of digital audio-video content. It also operates as an HDCP repeater for the downstream sink.

The eDP authentication option ASSR (Alternative Scrambler Seed Reset) is supported for embedded

application.

The I2C-to-AUX translator in STDP2600 allows the upstream HDMI source to access EDID and transfer

MCCS commands to a downstream DisplayPort sink device over the DisplayPort interface. This device has

an on-chip microcontroller with SPI and I2C host interface for system configuration purposes.

STDP2600 can be configured with an external SPI Flash for custom applications. In addition, it allows

register level configuration from an external host controller through I2C interface.