ST7538QTR集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

ST7538QTR屬于集成電路（IC）的驅動器接收器收發器。由意法半導體集團制造生產的ST7538QTR驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

Description

The ST7538Q is a Half Duplex synchronous/asynchronous FSK Modem designed for power line communication network applications. It operates from a single supply voltage and integrates a line driver and two linear regulators for 5V and 3.3V. The device operation is controlled by means of an internal register, programmable through the synchronous serial interface. Additional functions as watchdog, clock output, output voltage and current control, preamble detection, time-out, band in use are included. Realized in Multipower BCD5 technology that allows to integrate DMOS, Bipolar and CMOS structures in the same chip.

General features

■ Half duplex frequency shift keying (FSK) transceiver

■ Integrated power line driver with programmable voltage and current control

■ Programmable interface:

– Synchronous

– Asynchronous

■ Single supply voltage (from 7.5 up to 12.5V)

■ Very low power consumption (Iq = 5mA)

■ Integrated 5V voltage regulator (up to 50mA) with short circuit protection

■ Integrated 3.3V voltage regulator (up to 50mA) with short circuit protection

■ 3.3V or 5V digital supply

■ 8 programmable transmission frequencies

■ Programmable baud rate up to 4800BPS

■ Receiving sensitivity up to 250μVrms

■ Suitable to application in accordance with EN50065 CENELEC specifications

■ Carrier or preamble detection

■ Band in use detection

■ Programmable 24 or 48 bit register with security checksum

■ Mains zero crossing detection and synchronization

■ Watchdog timer

■ Output voltage freeze

■ 8 or 16 bit header recognition

■ UART/SPI host interface

■ ST7537 compatible