ST1480ACDRSLASHUS中文資料意法半導體數(shù)據(jù)手冊PDF規(guī)格書

Features

? ESD protection

– – ±15 kV human body model

– – ±8 kV IEC 1000-4-2 contact discharge

? Operates from a single 3.3 V supply - no charge pump required

? Interoperable with 5 V logic

? 1 μA low current shutdown mode max.

? Guaranteed 12 Mbps data rate

? -7 to 12 common mode input voltage range

? Half duplex versions available

? Industry standard 75176 pinout

? Current limiting and thermal shutdown for driver overload protection

? Guaranteed high receiver output state for floating, shorted or terminated inputs

with no signal present

? Allows up to 64 transceivers on the bus

Description

The ST1480US is ±15 kV ESD protected, 3.3 V low power transceiver for RS-485

and RS-422 communications. The device contains one driver and one receiver in half

duplex configuration. The ST1480US transmits and receives at a guaranteed data

rate of at least 12 Mbps. All transmitter outputs and receiver inputs are protected

to ±15 kV using human body model. Driver is short-circuit current limited and is

protected against excessive power dissipation by thermal shutdown circuitry that

places the driver outputs into a high-impedance state.

The ST1480US input has a true fail-safe feature that guarantees a logic high output if

both inputs are open circuit, shorted together or in the presence of a termination with

no signal on the bus.