SM8135B中文資料NPC數(shù)據(jù)手冊(cè)PDF規(guī)格書

OVERVIEW

The SM8135B is a charge pump type white LED driver. It can drive 1 to 4 backlight white LED connected in parallel, making it ideal for portable devices with small LCD. The charge pump switches between ×1 bypass mode, ×1.5 and ×2 boost mode in response to LED drive current requirements. The boost switching occurs in response to the drive current of all the connected LED and thus supports variations in LED forward-bias voltage drop (VF). Besides, the detection of switching is repeated in approx. 1sec-cycle by mode reset action, the SM8135B can respond to temporary variation of supply voltage. These ingenuities on switching detection can prolong the battery life to the fullest extent. Each LED drive current is controlled by a 4-channel LED drive

current control circuit. The LED drive current per channel is setup by external resistor.

FEATURES

■ Battery life extension by automatic charge pump switch between ×1, ×1.5 and ×2 according to the detection of the LED drive current

■ Controlling 1 to 4 lights of white LED connected in parallel

■ Set up LED drive current value by external resistor (120k?: 20mA/ch)

■ 1-wire input controlling

■ ON/OFF and brightness control by signal control ling of EN pin

■ Soft start circuit built-in

■ Thermal shut down circuit built-in

■ Input voltage range

No-load current (IOUT= 0mA): 2.7 to 4.6V

Load current (IOUT= 80mA): 3.0 to 4.6V

■ Maximum output voltage: 4.9V (typ)

■ Maximum output current: 80mA (typ)

■ Quiescent current

Not-switching (×1 mode): 0.3mA (typ)

Switching (×1.5 mode): 1.5mA (typ)

Switching (×2 mode): 1.5mA (typ)

■ Standby current: 0.01μA (typ)

■ Operating frequency (boost mode): 1MHz (typ)

■ LED drive current accuracy between channel (REST = 120k?): ± 5 (max)

■ Package: 16-pin QFN

APPLICATIONS

■ Cellular phone

■ PDA

■ Portable games

■ Handy terminal

■ Digital still camera

■ Digital video camera

■ LCD panel back light

■ White LED driving