SLG46585開發(fā)板套件編程器的評(píng)估板-嵌入式-復(fù)雜邏輯器件（FPGA,CPLD）規(guī)格書PDF中文資料

General Description

The SLG46585 is a small, low power component commonly used to integrate Mixed-Signal functions under control of an

asynchronous state machine. The user creates the circuit design by programming the one time Non-Volatile Memory (NVM) to

configure the interconnect logic, the IO Pins, and the macrocells of the SLG46585. In addition, the device contains one 1 A DC/

DC buck converter operating from 1 MHz to 2 MHz and four 150 mA configurable LDOs. This highly versatile device allows a

wide variety of functions and control logic to be designed within a very small, low power monolithic integrated circuit.

Key Features

? Four Analog Comparators

? Voltage Reference for Analog Comparators

? Analog Temperature Sensor

? Fifteen Combination Function Macrocells

? Three Selectable DFF/LATCH or 2-bit LUTs

? Six Selectable DFF/LATCH or 3-bit LUTs

? One Selectable Pipe Delay or Ripple Counter, or 3-bit

LUT

? Five 8-bit Delays/Counters or 3-bit LUTs

? Combinatorial Logic

? One 4-bit LUT with Two Outputs

? Programmable Asynchronous State Machine

? Eight States

? Flexible Input Logic from State Transitions

? Real Time Clock Binary Counter

? Four Tri-Mode 150 mA LDO Regulators

? High Power Mode (HP Mode): 150 mA Output

? Low Power Mode (LP Mode): 100 μA Output

? Power Switch Mode: Acts like a Load Switch

? 1 A Synchronous Constant-on-Time DC/DC Step Down

Converter

? Serial Communications

? I

2C Slave Protocol Interface

? Programmable Delay with Edge Detector Output

? Additional Logic Functions

? 2 Deglitch Filters with Edge Detectors

? Two Oscillators

? Configurable 25 kHz/2 MHz

? 1.73 kHz Low Power Oscillator

? Eight Byte RAM + OTP User Memory

? RAM with I2C interface

? User Defined Initial Values Transferred from OTP

? Power-On Reset

? Highly Versatile Macrocells

? Read Back Protection (Read Lock)

? 2.5 V to 5.5 V Supply

? Operating Temperature Range: -40 °C to 85 °C

? RoHS Compliant/Halogen-Free

? 29-pin MSTQFN: 3 mm x 3 mm x 0.55 mm, 0.4 mm pitch