SI9122E集成電路（IC）的PMIC-穩壓器-DCDC開關式控制器規格書PDF中文資料

SI9122E屬于集成電路（IC）的PMIC-穩壓器-DCDC開關式控制器。由威世科技半導體制造生產的SI9122EDC-DC 開關控制器PMIC（電源管理集成電路）DC 到 DC 開關式控制器是用于高效率電路的穩壓 IC，其配置為生成高于（突升或步升）或低于（突降或步降）輸入電源的輸出電源電壓。其他拓撲結構可能包括：降壓-升壓、反激、正激、Cuk、SEPIC、全橋、半橋和推挽式。這些器件不同于需要最小電壓并“燒盡”多余電壓的線性穩壓器。

FEATURES

? 92 primary/secondary duty cycle

? 135 °C over temperature protection

? Compatible with ETSI 300 132-2

? 28 V to 75 V input voltage range

? Integrated ± 1 A half bridge primary drivers

? Secondary synchronous rectifier control signals with

programmable deadtime delay

? Voltage mode control

? Voltage feedforward compensation

? High voltage pre-regulator operates during start-up

? Current sensing on low-side primary device

? Frequency foldback eliminates constant current tail

? Advanced maximum current control during start-up and

shorted load

? Low input voltage detection

? Programmable soft-start function

APPLICATIONS

? Network cards

? Power supply modules

? Distributed power systems

? Intermediate bus converter

? Brick converter

DESCRIPTION

Si9122E is a half-bridge controller IC ideally suited to fixed

telecom applications where high efficiency is required at low

output voltages (e.g. < 3.3 V). Designed to operate within the

fixed telecom voltage range of 36 V to 75 V, the IC is capable

of controlling and driving both the low and high-side switching

devices of a half bridge circuit and also controlling the

switching devices on the secondary side of the bridge. Due

to the very low on-resistance of the secondary MOSFETs, a

significant increase in conversion efficiency can be achieved

as compared with conventional Schottky diodes. Control of

the secondary devices is by means of a pulse transformer

and a pair of inverters. Such a system has efficiencies well in

excess of 90 even for low output voltages.

On-chip control of the dead time delays between the primary

and secondary synchronous signals keep efficiencies high

and prevent shorting of the power transformer. An external

resistor sets the oscillator frequency from 200 kHz to

500 kHz.

Si9122E has advanced current monitoring and control

circuitry which allow the user to set the maximum current in

the primary circuit. Such a feature acts as protection against

output shorting and also provides constant current into large

capacitive loads during start-up or when paralleling power

supplies. Current sensing is by means of a sense resistor on

the low-side primary device.