S6A0093中文資料三星數據手冊PDF規(guī)格書

INTRODUCTION

The S6A0093 is an LCD driver and controller LSI for liquid crystal dot matrix character display systems. It can display 2 or 3 lines of 16 characters with 5 x 8 dots format. It is capable of interfacing various microprocessors, supporting the 4-bit, 8-bit parallel modes and the clock synchronized serial mode. Voltage converter, oscillator, voltage regulator, voltage follower and bias circuit are built in the IC. The double height character mode and line vertical scroll functions are supported.

FEATURES

Driver Outputs

- Common outputs: 26 common

- Segment outputs: 80 segment

Applicable Panel Size

Internal Memory

- Character Generator ROM (CGROM): 10,240 bits (256 characters x 5 x 8 dots)

- Character Generator RAM (CGRAM): 320 bits (8 characters x 5 x 8 dots)

- Display Data RAM (DDRAM): 512 bits (16 characters x 4 lines)

- Segment Icon RAM (ICONRAM): 80 bits (80 icons)

MPU Interface

- No busy MPU interface (no busy check or no execution waiting time)

- 8-bit parallel interface mode: 68-series and 80-series are available.

- 4-bit parallel interface mode: 68-series and 80-series are available.

- Serial interface mode: 4 pins clock synchronized serial interface

Function Set

- Various instruction set: display control, power save, power control, etc.

- COM / SEG bi-directional (4-type LCD application available)

- H/W reset (RESETB)

Built-in Analog Circuit

- Internal RC oscillator circuit or external clock

- Electronic volume for contrast control (32 steps)

- Voltage converter / voltage regulator / voltage follower & bias circuit

Low Power Operation

- Sleep mode operation (5mA Max.)

- Normal mode operation (80mA Max.)

Operating Voltage Range

- Power supply voltage (VDD): 2.4V ~ 5.5V

- LCD driving voltage (VLCD = V0 - VSS): 6.0V Max.

Package Type

- Gold bumped chip or TCP