Description

The RE46C165/6/7/8 devices are low-power, CMOS photoelectric type, smoke detector ICs. With minimal external components, these circuits will provide all the required features for a photoelectric type smoke detector.

Each design incorporates a gain selectable photo amplifier for use with an infrared emitter/detector pair. An internal oscillator strobes power to the smoke detection circuitry for 100 μs every 10 seconds to keep standby current to a minimum. If smoke is sensed, the detection rate is increased to verify an alarm condition. A high gain mode is available for push button chambertesting.

Features

? Temporal Horn Pattern or Continuous Tone

? Alarm Memory

? Sensitivity Control Times:

- 9 minutes (RE46C165/6)

- 1.2 minutes (RE46C167/8)

? I/O Filter and Charge Dump

? Interconnect up to 40 Detectors

? Internal Power-on Reset

? >2000V ESD Protection (HBM) on All Pins

? Low Quiescent Current Consumption (<8 μA)

? Internal Low Battery Detection and Chamber Test

? RoHS Compliant Lead-Free Packaging

RE46C168S屬于集成電路（IC） > 傳感器和檢測器接口。微芯科技股份有限公司制造生產的RE46C168S傳感器和檢測器接口該系列產品可執行信號調節、數據轉換、激勵生成和/或各種將傳感器或變送器機構連接到主機設備所需的其他功能。示例包括用于 CCD 圖像傳感器的控制器、用于 4-20 mA 接口和類似應用的電流變送器、超聲變送器前端、惠斯通電橋接口等。