PTN3342D集成電路（IC）的驅(qū)動器接收器收發(fā)器規(guī)格書PDF中文資料

Description

The PTN3342 is a differential line receiver that implements the electrical characteristics of Low-Voltage Differential Signaling (LVDS). This device meets or exceeds the requirements of the ANSI TIA/EIA-644 Standard. LVDS is used to achieve higher data rates on commonly used media. LVDS overcomes the limitations of achievable slew rates and EMI restrictions of previous differential signaling techniques. The PTN3342 operates at a 3.3 volt supply level. Any of the four differential receivers provides a valid logical output state with a ±100 mV differential input voltage within the input common-mode voltage range. The input common-mode voltage range allows 1 volt of ground potential difference between two LVDS nodes. The PTN3342 is identical to the PTN3332 but with the termination resistor integrated with the receiver.

Features

■ Meets or exceeds the requirements of ANSI TIA/EIA-644 Standard

■ Designed for signaling rates of up to 400 Mbps

■ Differential input thresholds of ±100 mV

■ Power dissipation of 60 mW typical at 200 MHz

■ Typical propagation delay of 2.6 ns

■ Low Voltage TTL (LVTTL) logic output levels

■ Pin compatible with AM26LS32 and SN65LVDS32

■ Open-circuit fail safe

■ Termination resistors on chip.

Applications

■ Low voltage, low EMI, high speed differential signal receiver

■ Point-to-point high speed data transmission

■ High performance switches and routers.