PTAS2120RBGR中文資料德州儀器數(shù)據(jù)手冊(cè)PDF規(guī)格書

1 Features

? Powerful Class-D amplifier

– 8.2W 1% THD+N

– 14.75V boost with 5.1A max current limit

? Best in class efficiency

– Upto 90% efficiency at system level for 8Ω load

– 12.9mW idle channel power, noise gate off

– 5mW idle channel power, noise gate on

– Integrated 1.8V Y-bridge

? High performance audio channel

– 4.2μV A-wt. idle channel noise

– 114dB Dynamic Range

– -89dB THD+N

– Low EMI performance with ERC and SSM

– < 1μs chip to chip group delay matching

? Advanced integrated features

– Signal detection high efficiency modes

– High accuracy voltage monitor & temp sensor

– Programmable battery current limit at 39mA

step size

? Ease of use features

– Hardware pin control or I2C control

– 1S battery, 2S battery, External PVDD (3S

battery) supply

– Clock based power up/down

– Auto clock rate detection: 16 to 192kHz

– MCLK free operation

– Thermal and over current protection

? Power Supplies and user interface

– VBAT: 2.5V to 5.5V

– VDD: 1.65V to 1.95V

– IOVDD: 1.8V or 3.3V

– VBAT_SNS: 2.5V to 10.0V

– I2S/TDM: 8 channels

– HW pin control or I2C based control

? 26-Pin, 0.4mm Pitch, QFN package

2 Applications

? Smart Speakers with Voice Assistance

? Bluetooth and Wireless speakers

? Tablets, Wearables

? Laptop, Desktop Computers

3 Description

The TAS2120 is a mono, digital input Class-D audio

amplifier with an integrated Boost for higher power

delivery in battery-operated systems.

Device is optimized to deliver best battery life

for real-use cases of music playback and voice

calls. Advanced efficiency optimization features like

Y-bridge, and algorithms enable the device to produce

best-in-class efficiency across all power regions

of operation. The Class-D amplifier is capable of

delivering 8.2W output power using integrated Class-

H Boost.

TAS2120 device supports look-ahead algorithm based

optimum boost voltage levels to match the output of

audio signal. This provides all the power needed for

peak output while significantly reducing the average

power consumption.

Up to four devices can share a common bus via

I2S/TDM + I2C interfaces. The device also supports

five HW Control pins that can configure the device for

the desired mode of operation.