Description

The PM6675S device consists of a single high efficiency step-down controller and an independent Low Drop-Out (LDO) linear regulator.

The Constant On-Time (COT) architecture assures fast transient response supporting both electrolytic and ceramic output capacitors. An embedded integrator control loop compensates the DC voltage error due to the output ripple.

A selectable low-consumption mode allows the highest efficiency over a wide range of load conditions. The low-noise mode sets the minimum switching frequency to 33 kHz for audio-sensitive applications.

The LDO linear regulator can sink and source up to 2 Apk. Two fixed current limits (±1 A-±2 A) can be chosen.

An active soft-end is independently performed on both the switching and the linear regulators outputs when disabled.

Features

■ Switching section

– 4.5 V to 28 V input voltage range

– 0.6 V, ±1 voltage reference

– Selectable 1.5 V fixed output voltage

– Adjustable 0.6 V to 3.3 V output voltage

– 1.237 V ±1 reference voltage available

– Very fast load transient response using constant on-time control loop

– No RSENSE current sensing using low side MOSFETs RDS(ON)

– Negative current limit

– Latched OVP and UVP

– Soft-start internally fixed at 3 ms

– Selectable pulse skipping at light load

– Selectable No-Audible (33 kHz) pulse skip mode

– Ceramic output capacitors supported

– Output voltage ripple compensation

– Output soft-end

■ LDO regulator section

– Adjustable 0.6 V to 3.3 V output voltage

– Selectable ±1 Apk or ±2 Apk current limit

– Dedicated power-good signal

– Ceramic output capacitors supported

– Output soft-end

Applications

■ Notebook computers

■ Graphic cards

■ Embedded computers

PM6675S屬于集成電路（IC） > 線性穩壓器控制器。意法半導體（ST）集團制造生產的PM6675S穩壓器 - 線性 + 開關此產品族中的產品用于構建執行 DC-DC 轉換或電壓調節功能的電路，采用的是開關模式和線性穩壓器功能的組合。雖然具體的拓?fù)涓鞑幌嗤?，但此類產品的主要目的是將開關模式技術的效率優勢與線性穩壓技術的低噪聲特性結合在一起。