PM5316-1中文資料PMC數(shù)據(jù)手冊(cè)PDF規(guī)格書

FEATURES

? Monolithic four channel SONET/SDH Payload Extractor/Aligner for use in STS-3 (STM-1/AU-3) or STS-3c (STM-1/AU-4) interface applications, operating at serial interface speeds of 155.52 Mbit/s.

? Provides integrated clock recovery and clock synthesis to allow direct interface to optical modules.

? Each channel provides termination for SONET Section and Line, SDH Regenerator Section and Multiplexer Section transport overhead, and path overhead of three STS-1 (STM-0/AU- 3) paths or a single STS-3c (STM- 1/AU-4) path.

? Each channel maps three STS-1 (STM-0/AU-3) payloads or a single STS-3c (STM-1/AU-4) payload to system timing reference, accommodating plesiosynchronous timing offsets between the references through pointer processing.

? The entire SONET/SDH transport and path overheads are extracted to and inserted from dedicated pins.

? Frames to the SONET/SDH receive stream and inserts framing bytes and STS identification into the transmit stream and processes or inserts the transport overhead.

? Interprets or generates the STS (AU) pointer bytes (H1, H2, H3), extracts or inserts the synchronous payload envelope(s) and processes or inserts the path overhead.

? Supports Automatic Protection Switching (APS):

? Ring control port communication of path REI and path RDI alarms;

? Filters the APS channel (K1,K2) bytes into internal registers; inserts the APS channel into the transmit stream.

? Provides Time Slot Interchange (TSI) function at the ADD and DROP TelecomBus Interfaces for grooming twelve STS-1 (STM-0/AU-3) paths.

? Supports line loopback from the line side receive stream to the transmit stream and diagnostic loopback from an ADD TelecomBus interface to a DROP TelecomBus interface.

? Provides a standard five signal P1149.1 JTAG test port for boundary scan board test purposes.

? Provides a generic 8-bit microprocessor bus interface for configuration, control, and status monitoring.

? Low power 3.3 V CMOS with TTL compatible digital inputs and CMOS/TTL digital outputs.

? Industrial temperature range (-40°C to +85°C).

? 520 pin Super BGA package.

? Supports clock recovery bypass for use in applications where external clock recovery is desired.

? Complies with Bellcore GR-253-CORE jitter tolerance, jitter transfer, and intrinsic jitter criteria.

APPLICATIONS

? Channelized STS-3/STM-1 Interfaces for:

? Optical Cross Connects;

? Digital Cross Connects;

? Router and Switch Line Cards;

? ADM Aggregate Cards for TDM and Multi-service applications;

? Terminal Multiplexers.