PESD2CAN24DCKRQ1中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? IEC 61000-4-2 level 4 ESD protection:

– ±30-kV contact discharge

– ±30-kV air-gap discharge

? ISO 10605 (330 pF, 330 Ω) ESD protection:

– ±30-kV contact discharge

– ±30-kV air-gap discharge

? Tested in compliance to IEC 61000-4-5

? 24 V working voltage

? Bidirectional ESD protection

? 2-channel device provides complete ESD

protection with single component

? Low clamping voltage protects downstream

components

? AEC-Q101 qualified

? I/O capacitance = 3 pF (typical)

? SOT-23 (DBZ) small, standard, common footprint

? SOT-323, SC-70 (DCK) very small, standard,

space saving, common footprint

? Leaded packages used for automatic optical

inspection (AOI)

2 Applications

? Automotive in-vehicle networks:

– Controller area network (CAN)

– Controlled area network flexible data-rate

(CAN-FD)

– Low, fault tolerant CAN

– High-speed CAN

? Industrial control networks:

– DeviceNet IEC 62026-3

– CANopen – CiA 301/302-2 and EN 50325-4

3 Description

The ESD2CAN24-Q1 is a bidirectional ESD protection

diode for Controller Area Network (CAN) interface

protection. The ESD2CAN24-Q1 is rated to dissipate

contact ESD strikes beyond the maximum level

specified in the ISO 10605 automotive standard

(±30-kV Contact, ±30-kV Airgap). The low dynamic

resistance and low clamping voltage ensures system

level protection against transient events. This

protection is key as automotive systems require a

high level of robustness and reliability for safety

applications.

This device features a low IO capacitance per

channel and a pin-out to suit two automotive CAN

bus lines (CANH and CANL) from the damage

caused by ElectroStatic Discharge (ESD) and other

transients. Additionally, the 3 pF line capacitance of

the ESD2CAN24-Q1 is suitable for CAN, CANFD,

CAN SiC, and CAN-XL applications that can support

data rates up to 10 Mbps.

The ESD2CAN24-Q1 is offered in two leaded

packages for easy flow through routing.