General description

The PCA9545A is a quad bidirectional translating switch controlled via the I2C-bus. The

SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individual

SCx/SDx channel or combination of channels can be selected, determined by the

contents of the programmable control register. Four interrupt inputs, INT0 to INT3, one

for each of the downstream pairs, are provided. One interrupt output, INT, acts as an

AND of the four interrupt inputs.

An active LOW reset input allows the PCA9545A to recover from a situation where one

of the downstream I2C-buses is stuck in a LOW state. Pulling the RESET pin LOW resets

the I2C-bus state machine and causes all the channels to be deselected as does the

internal power-on reset function.

The pass gates of the switches are constructed such that the VDD pin can be used to limit

the maximum high voltage which is passed by the PCA9545A. This allows the use of

different bus voltages on each pair, so that 1.8 V or 2.5 V or 3.3 V parts can communicate

with 5 V parts without any additional protection. External pull-up resistors pull the bus up

to the desired voltage level for each channel. All I/O pins are 5 V tolerant.

Features and benefits

? 1-of-4 bidirectional translating switches

? I2C-bus interface logic; compatible with SMBus standards

? Four active LOW interrupt inputs

? Active LOW interrupt output

? Active LOW reset input

? Two address pins allowing up to four devices on the I2C-bus

? Channel selection via I2C-bus, in any combination

? Power-up with all switch channels deselected

? Low Ron switches

? Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses

? No glitch on power-up

? Supports hot insertion

? Low standby current

? Operating power supply voltage range of 2.3 V to 5.5 V

? 5 V tolerant Inputs

? 0 Hz to 400 kHz clock frequency

? ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per

JESD22-C101

? Latch-up protection exceeds 100 mA per JESD78

? Three packages offered: SO20, TSSOP20, and HVQFN20

PCA9545AD屬于集成電路（IC） > 專用。恩智浦半導體公司制造生產的PCA9545AD專用該系列產品可提供所需的功能，用以將信息源/信宿連到各種復雜或范圍狹窄應用中的傳感器、變送器、致動器、傳輸介質或其他此類端點。例如，汽車安全氣囊驅動器、車身控制和信息娛樂總線、自適應電纜均衡器、智能卡等等。