ORT8850L-1BMN680I集成電路（IC）的FPGA（現場可編程門陣列）規(guī)格書PDF中文資料

Introduction

Field Programmable System-on-a-Chip (FPSCs) bring a whole new dimension to programmable logic: Field Programmable Gate Array (FPGA) logic and an embedded system solution on a single device. Lattice has developed a solution for designers who need the many advantages of FPGA-based design implementation, coupled with highspeed serial backplane data transfer.

Features

Embedded Core Features

? Implemented in an ORCA Series 4 FPGA.

? Allows a wide range of high-speed backplane applications, including SONET transport and termination.

? No knowledge of SONET/SDH needed in generic applications. Simply supply data, 78 MHz—106 MHz clock, and a frame pulse.

? High-Speed Interface (HSI) function for clock/data recovery serial backplane data transfer without external clocks.

? Eight-channel HSI function provides 850 Mbits/s serial interface per channel for a total chip bandwidth of 6.8 Gbits/s (full duplex).

? HSI function uses Lattice’s 850 Mbits/s serial interface core. Rates from 126 Mbits/s to 850 Mbits/s are supported.

? LVDS I/Os compliant with EIA?-644 support hot insertion. All embedded LVDS I/Os include both input and output on-board termination to allow long-haul driving of backplanes.

? Low-power 1.5 V HSI core.

? Low-power LVDS buffers.

? Programmable STS-3, and STS-12 framing.

? Independent STS-3, and STS-12 data streams per quad channels.

? 8:1 data multiplexing/demultiplexing for 106.25 MHz byte-wide data processing in FPGA logic.

? On-chip, Phase-Lock Loop (PLL) clock meets (type B) jitter tolerance specification of ITU-T recommendation G.958.

? Powerdown option of HSI receiver on a per-channel basis.

? HSI automatically recovers from loss-of-clock once its reference clock returns to normal operating state.

? Frame alignment across multiple ORT8850 devices for work/protect switching at OC-192/STM-64 and above rates.

? In-band management and configuration through transport overhead extraction/insertion.

? Supports transparent modes where either the only insertion is A1/A2 framing bytes, or no bytes are inserted.

? Streamlined pointer processor (pointer mover) for 8 kHz frame alignment to system clocks.

? Built-in boundry scan (IEEE ?1149.1 JTAG).

? FIFOs align incoming data across all eight channels (two groups of four channels or four groups of two channels) for both SONET scrambling. Optional ability to bypass alignment FIFOs.

? 1 + 1 protection supports STS-12/STS-48 redundancy by either software or hardware control for protection switching applications. STS-192 and above rates are supported through multiple devices.

? ORCA FPGA soft intellectual property core support for a variety of applications.

? Programmable Synchronous Transport Module (STM) pointer mover bypass mode.

? Programmable STM framer bypass mode.

? Programmable Clock and Data Recovery (CDR) bypass mode (clocked LVDS High-Speed Interface).

? Redundant outputs and multiplexed redundant inputs for CDR I/Os allow for implementation of eight channels with redundancy on a single device.