OPA892中文資料德州儀器數據手冊PDF規格書

1 Features

? Ultra-low 0.95nV/√Hz voltage noise

? High speed:

– 2GHz gain-bandwidth product

– 700V/μs slew rate

– 30ns settling time (0.1%)

? Stable at gains ≥10V/V

? Output drive, IO = 200mA (typical)

? Very low distortion:

– THD = –78dBc (f = 1MHz, RL = 150Ω)

– THD+N = –114dBc (f = 1kHz, BW = 80kHz)

? Wide range of power supplies:

– VCC = ±4.5V to ±18V

? Offset nulling pins on the OPA892

2 Applications

? Ultrasound scanner

? Source measurement unit (SMU)

? Power quality meter

? Ultrasound scanner

? Vector signal transceiver (VST)

? Professional audio mixer or control surface

? Professional microphones and wireless systems

? Professional speaker systems

? Professional audio amplifier

? Soundbar

? Turntable

? Professional video camera

? Guitar and other instrument amplifier

? Data acquisition (DAQ)

3 Description

The OPA892 and OPA2892 (OPAx892) are ultra-low

voltage noise, high-speed voltage-feedback amplifiers

that are an excellent choice for applications requiring

low voltage noise, including communication and

imaging. The single-amplifier OPA892 and the dualamplifier

OPA2892 offer very good ac performance

with a 290MHz bandwidth, a 700V/μs slew rate, and

a 30ns settling time (0.1%) for a gain of 10V/V. The

OPAx892 are stable at gains of 10 or greater and –9

or less. These amplifiers have a high drive capability

of 200mA and draw only 7.5mA of supply current

per amplifier. With a total harmonic distortion (THD)

of –68dBc at f = 1MHz, the OPAx892 are designed

for applications requiring low distortion. Because the

distortion remains low over a wide range of output

voltages, the OPAx892 is useful in large dynamicrange

applications such as imaging, sonar, and audio.