NVT4556BUK集成電路（IC）的專用規(guī)格書PDF中文資料

General description

The NVT4556 device is built for interfacing a SIM card with a single low-voltage host-side

interface. The NVT4556 contains an LDO that can deliver two different voltages, 1.8 V or

3 V, from a typical mobile phone battery voltage, and three level translators to convert the

data, RSTn and CLKn signals between a SIM card and a host microcontroller.

The NVT4556 VCC pin provides power to the host side I/Os and doubles as an enable pin,

for this reason it can be connected to a GPIO that matches the host side voltage. The total

current draw from the VCC pin is only 100 ?A maximum. The NVT4556 also uses the

I2C-bus interface to enable normal operation and to select either 1.8 V or 3 V for the SIM

card power supply. The NVT4556 can also disable the LDO functionality while maintaining

the level translator paths so that the user can use a system-controlled regulator to power

the SIM card power supply. The NVT4556 can enable users to provide second and third

SIM card functionality with a low-voltage one host SIM port, at the same time reducing the

number of GPIOs used in the system. The NVT4556 is compliant with all ETSI, IMT-2000

and ISO-7816 SIM/Smart card interface requirements.

The NVT4556 is available in a 12-pin WLCSP package and has three factory

programmed slave address options.

Features and benefits

? Support SIM card supply voltages 1.8 V and 3 V

? Input voltage range to LDO: 2.5 V to 5.25 V

? Host microcontroller operating voltage range: 1.55 V to 3.6 V

? VCC input pin provides both host supply voltage and logic level hardware

enable/disable pin: source through Host GPIO (ICC <100 ?A)

? RST_HOST/EN pin can be programmed as a reset pin or as a device enable/disable

pin

? Level translation of I/O, RSTn and CLKn between SIM card and host-side interface

with capacitive isolation

? I2C-bus interface for device enable and LDO voltage selection

? Low current shutdown mode < 3 ?A

? Supports clock speed beyond 5 MHz clock

? Supports CLK stop mode

? Integrated EMI filters

? Incorporates ISO-7816-3 shutdown feature for the SIM card signals

? ETSI, IMT2000 and ISO-7816 compliant

? ?8 kV IEC61000-4-2 ESD protected on all SIM card contact pins

? Pb-free, Restriction of Hazardous Substances (RoHS) compliant and free of halogen

and antimony (Dark Green compliant)

? Available in 12-pin WLCSP package (1.205 mm ? 1.605 mm ? 0.412 mm,

0.4 mm pitch)

Applications

? NVT4556 can be used with a range of SIM card attached devices including:

? Mobile and personal phones

? Wireless modems

? SIM card terminals