The NCP1256 includes everything to build cost?effective switch

mode power supplies ranging from a few watts up to several tens of

watts. Housed in a tiny TSOP?6 package, the part can be supplied up

to 30 V. It hosts a jittered 65 or 100?kHz switching circuitry operated

in peak current mode control. When the power in the secondary side

starts decreasing, the controller automatically folds back its switching

frequency down to a minimum level of 26 kHz. As the power further

goes down, the part enters skip cycle while freezing the peak current.

NCP1256 comes with several protection features such as a

timer?based auto?recovery short circuit protection, lossless OPP, and

an easily adjustable Brown Out (BO) pin. Two inputs are provided to

latch off the part in a practical way, for instance with OVP and OTP

events. Several options exists to chose latch or auto?recovery for these events.

Features

? Fixed?frequency 65?kHz or 100?kHz Current?mode Control

Operation

? Adjustable Over Power Protection (OPP) Circuit, Disabled at Low

Line

? Adjustable Brown Out Level

? Frequency Foldback down to 26 kHz and Skip?cycle in Light Load

Conditions

? Internally?fixed Slope Compensation Ramp

? Internally?fixed 4?ms Soft?start

? 70?ms Timer?based Auto?recovery Short?circuit Protection

? Frequency Jittering in Normal and Frequency Foldback Modes

? Double Hiccup Auto?recovery Short?circuit Protection

? Pre?short Ready for Latched OCP Option

? Latched/Auto?Recovery OVP Protection on Vcc

? Latched Inputs for Improved Robustness (OVP and OTP

implementations)

? Auto?Recovery ac Line OVP Protection (E Version)

? +500 mA/ ?500 mA Source/Sink Drive Capability

? EPS 2.0 Compliant

? These are Pb?Free Devices

Typical Applications

? Ac?dc Adapters for Portable Devices, Computers, Tablets etc.

? Auxiliary Power Supplies

NCP1256ASN65T1G屬于集成電路（IC） > AC DC 轉換器，離線開關。安森美半導體公司制造生產的NCP1256ASN65T1GAC DC 轉換器，離線開關該系列是元器件級控制產品，用于構建將交流市電轉換為直流電（通常電壓大幅降低）的設備。集成和未集成系統主要開關元件的器件均包括在內。由于高輸入輸出電壓比，以及此類系統中通常需要隔離，這些器件通常與外部變壓器配合使用。盡管通常使用定制變壓器來實現此用途，但也有許多專門用于此用途的庫存產品，請參見“開關轉換器，SMPS 變壓器”標題。