MTFDDAK512TBN-2AR1ZTAYYES中文資料鎂光數據手冊PDF規格書

Features

? Micron? 3D TLC NAND Flash

? RoHS-compliant package

? SATA 6 Gb/s interface

? TCG/Opal 2.0-compliant self-encrypting drive

(SED)

? Compatible with Microsoft eDrive?

? Hardware-based AES-256 encryption engine

? ATA modes supported

– PIO mode 3, 4

– Multiword DMA mode 0, 1, 2

– Ultra DMA mode 0, 1, 2, 3, 4, 5, 6

? Industry-standard, 512-byte sector size support

? Hot-plug/hot-remove capable (2.5)

? Device sleep (DEVSLP), extreme low-power mode

? Native command queuing support with 32-command

slot support

? ATA-8 ACS3 command set compliant

? ATA security feature command set and password

login support

? Secure erase (data page) command set: fast and secure

erase

? Sanitize device feature set support

? Self-monitoring, analysis, and reporting technology

(SMART) command set

? Dynamic write acceleration

? Adaptive thermal monitoring

? Power loss protection for data-at-rest

? Performance1, 2

– PCMark? Vantage (HDD test suite score): Up to

84,000

– Sequential 128KB READ: Up to 530 MB/s

– Sequential 128KB WRITE: Up to 500 MB/s

– Random 4KB READ: Up to 55,000 IOPS

– Random 4KB WRITE: Up to 83,000 IOPS

– READ/WRITE latency: 85μs/40μs (TYP)

? Reliability

– MTTF: 1.5 million device hours3

– Static and dynamic wear leveling

– Uncorrectable bit error rate (UBER): <1 sector

per 1015 bits read

? Low power consumption

– Device Sleep numbers: <4mW

– DIPM numbers: 110mW TYP4

? Endurance: Total bytes written (TBW)

– 120TB

? Capacity (unformatted): 128GB

? 2.5-inch × 7mm form factor

? Secure firmware update with digitally signed firmware

image

? Operating temperature

– Commercial (0°C to +70°C)5

Notes: 1. Typical I/O performance numbers as measured

fresh-out-of-the-box (FOB) using Iometer

with a queue depth of 32 and write

cache enabled.

2. 4 KB transfers used for READ/WRITE latency

values.

3. The product achieves a mean time to failure

(MTTF) based on population statistics not

relevant to individual units.

4. Active average power measured during execution

of MobileMark? with DIPM (deviceinitiated

power management) enabled.

5. Temperature measured by SMART attribute

194.