MP8798中文資料艾科嘉數(shù)據(jù)手冊(cè)PDF規(guī)格書

GENERAL DESCRIPTION

The MP8798 is a flexible, easy to use, precision 10-bit Analog-to-Digital Converter with 4-channel mux that operates over a wide range of input and sampling conditions. The MP8798 can operate with pulsed “on demand” conversion operation or continuous “pipeline” operation for sampling rates up to 1 MHz. The elimination of the S/H, requirements, very low power, and small package size offer the designer a low cost solution. No sample and hold is required for charge couple device applications, up to 1 MHz, or multiplexed input applications when the signal source bandwidth is limited to 100 kHz.

FEATURES

? 10-Bit Resolution

? 4-Channel Mux

? Sampling Rates from <1 kHz to 1 MHz

? Very Low Power CMOS - 30 mW (typ)

? Power Down; Lower Consumption – 3 mW (typ)

? Input Range between GND and VDD

? No S/H Required for Analog Signals less than 100 kHz

? No S/H Required for CCD Signals less than 1 MHz

? Single Power Supply (4 to 6 Volts)

? Latch-Up Free

? High ESD Protection: 4000 Volts Minimum

? 3 V Version: MP87L98

BENEFITS

? Reduced Board Space (Small Package)

? Reduced External Parts, No Sample/Hold Needed

? Suitable for Battery & Power Critical Applications

? Designer can Adapt Input Range & Scaling

APPLICATIONS

? μP/DSP Interface and Control Applications

? High Resolution Imaging – Scanners & Copiers

? Wireless Digital Communications

? Multiplexed Data Acquisition