MC20902中文資料METICOM數(shù)據(jù)手冊PDF規(guī)格書

General Description

The MC20902 is a 5 Channel, high performance FPGA bridge IC, which converts incoming LVDS high

speed and incoming CMOS low speed data streams into a MIPI D-PHY compliant output stream. The

MC20902 can also convert an LVDS signal into an SLVS signal.

The MC20902 can be connected to any signal source, for example FPGAs or DSPs.

Data rates can be from 0 Mbps to 2.5 Gbps in HS (High Speed) mode and up to 20 Mbps in LPDT

(Low Power Data Transmission) mode.

Key Features

? Output is compliant to MIPI D-PHY interfaces using the DSI, CSI-1 and CSI-2 standards

o HS mode data rate: up to a maximum of 2.5 Gbps

o LPDT mode data rate: up to 20 Mbps

? BTA supported (Bus Turnaround at Channel A or E)

? Pin Swap possibility

? 5 Channel device

? Conversion of LVDS input to SLVS output

o LVDS data rate: up to a maximum of 2.5 Gbps

? No additional level shifters needed

? Arbitrary power up sequence

? Available as a bare die

o RoHS compliant, Pb-free

? Available in a TQLMP-48 package

o 7mm * 7mm * 0.9mm

o 0.5mm pitch

o RoHS compliant, Pb-free