Serial-Input PLL Frequency Synthesizer with Aanalog Phase Detector

Interfaces with Dual–Modulus Prescalers

The MC145159–1 has a programmable 14–bit reference counter, as well as fully programmable divide–by–N/divide–by–A counters. The counters are programmed serially through a common data input and latched into the appropriate counter latch, according to the last data bit (control bit) entered.

When combined with a loop filter and VCO, this device can provide all the remaining functions for a PLL frequency synthesizer operating up to the device’s frequency limit. For higher VCO frequency operations, a down mixer or a dual–modulus prescaler can be used between the VCO and the PLL.

? Operating Temperature Range: – 40 to 85°C

? Low Power Consumption Through Use of CMOS Technology

? 3.0 to 9.0 V Supply Range

? On– or Off–Chip Reference Oscillator Operation

? Compatible with the Serial Peripheral Interface (SPI) on CMOS MCUs

? ÷ R Range = 3 to 16383

? ÷ N Range = 16 to 1023, ÷ A Range = 0 to 127

? High–Gain Analog Phase Detector

? See Application Note AN969