General Description

The MAX9951/MAX9952 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instrumentation that requires a PMU per pin or per site.

The MAX9951/MAX9952 force or measure voltages in the -2V to +7V through -7V to +13V ranges, dependent upon the supply voltage (VCC and VEE). The devices handle supply voltages of up to +30V (VCC to VEE) and a 20V device-under-test (DUT) voltage swing at full current. The MAX9951/MAX9952 also force or measure currents up to ±64mA with a lowest full-scale range of ±2μA. Integrated support circuitry facilitates use of an external buffer ampli fier for current ranges greater than ±64mA.

Features

? Force Voltage/Measure Current (FVMI)

? Force Current/Measure Voltage (FIMV)

? Force Voltage/Measure Voltage (FVMV)

? Force Current/Measure Current (FIMI)

? Force Nothing/Measure Voltage (FNMV)

? Force Nothing/Measure Current (FNMI, Range E Only)

? Termination/Measure Current

? Termination/Measure Voltage

? Five Programmable Current Ranges

???? ±20μA

???? ±20μA

???? ±200μA

???? ±2mA

???? ±64mA

? -2V to +7V Through -7V to +13V Input-Voltage Range

? Force-Current/Measure-Current Adjustable Voltage Offset (IOS)

? Programmable Voltage Clamps at Force Output

? Low-Leakage, High-Impedance Measure, and Force States

? 3-Wire Serial Interface

? Low 6mA (max) Quiescent Current per PMU