1.1 Overview

The M66596 is a USB (Universal Serial Bus) Rev. 2.0 host and peripheral controller that supports USB Hi-Speed

and Full-Speed transfers. This controller has a built-in USB transceiver and supports all of the transfer types defined

by the USB specification. M66596 has a compact package and is pin compatible with the peripheral controller

M66592.

The M66596 has a 5 kB built-in buffer memory for data transfers and enables use of up to eight pipes. For pipes 1

to 7, any endpoint numbers can be assigned, based on the user’s system. The controller can be connected to the CPU

using either a separate bus or a multiplex bus. Moreover, a split bus interface (dedicated external DMA interface) is

provided independent of the CPU bus interface, making this an ideal choice for systems that require transfer of large

volumes of data at high speed.

1.2 Features

1.2.1 Built in USB Hi-Speed host and peripheral controller

? USB Hi-Speed host and peripheral controllers are built in 1 chip.

? Both Hi-Speed transfer (480Mbps) and Full-Speed transfer (12Mbps) are supported

? It is possible to change host or peripheral mode by register setup.

? Built-in Hi-Speed / Full-Speed USB transceiver

1.2.2 Reduced power consumption

? 1.5 V core power supply, and selectable bus interface power supply 3.3V or 1.8V.

? Low power consumption makes this ideal for mobile devices

? Low-power mode (power-saving sleep state) supported to reduce power consumption during suspended

operation