Description

The M16C/62 group of single-chip microcomputers are built using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 100-pin plastic molded QFP. These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1M bytes of address space, they are capable of executing instructions at high speed. They also feature a built-in multiplier and DMAC, making them ideal for controlling office, communications, industrial equipment, and other high-speed processing applications.

The M16C/62 group includes a wide range of products with different internal memory types and sizes and various package types.

Features

? Memory capacity..................................ROM (See Figure 1.1.4. ROM Expansion)

RAM 3K to 20K bytes

? Shortest instruction execution time ......

62.5ns (f(XIN)=16MHZ, VCC=5V)

100ns (f(XIN)=10MHZ, VCC=3V, with software one-wait) :

Mask ROM, flash memory 5V version

142.9ns (f(XIN)=7MHZ, VCC=3V, with software one-wait) :

One-time PROM version

? Supply voltage .....................................4.2 to 5.5V (f(XIN)=16MHZ, without software wait) :

Mask ROM, flash memory 5V version

4.5 to 5.5V (f(XIN)=16MHZ, without software wait) :

One-time PROM version

2.7 to 5.5V (f(XIN)=10MHZ with software one-wait) :

Mask ROM, flash memory 5V version

2.7 to 5.5V (f(XIN)=7MHZ with software one-wait) :

One-time PROM version

? Low power consumption ......................25.5mW ( f(XIN)=10MHZ, with

software one-wait, VCC = 3V)

? Interrupts..............................................25 internal and 8 external interrupt sources,

4 software interrupt sources; 7 levels

(including key input interrupt)

? Multifunction 16-bit timer......................5 output timers + 6 input timers

? Serial I/O ..............................................5 channels (3 for UART or clock synchronous,

2 for clock synchronous)

? DMAC ..................................................2 channels (trigger: 24 sources)

? A-D converter.......................................10 bits X 8 channels (Expandable up to 10 channels)

? D-A converter.......................................8 bits X 2 channels

? CRC calculation circuit.........................1 circuit

? Watchdog timer....................................1 line

? Programmable I/O ...............................87 lines

? Input port............................................. 1 line (P85 shared with NMI pin)

? Memory expansion ..............................Available (to 1.2M bytes or 4M bytes)

? Chip select output ................................4 lines

? Clock generating circuit .......................2 built-in clock generation circuits

(built-in feedback resistor, and external ceramic or quartz oscillator)

Applications

Audio, cameras, office equipment, communications equipment, portable equipment