M30620FCNFP中文資料三菱電機數(shù)據(jù)手冊PDF規(guī)格書

Description

The M16C/62N group of single-chip microcomputers are built using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 100-pin plastic molded QFP. These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1M bytes of address space, low voltage (2.4V(mask ROM version is 2.2V) to 3.6V), they are capable of executing instructions at high speed. They also feature a built-in multiplier and DMAC, making them ideal for controlling office, communications, industrial equipment, and other high-speed processing applications.

Features

? Memory capacity..................................ROM (See Figure 1.1.4. ROM Expansion) RAM 10K to 20K bytes

? Shortest instruction execution time ......62.5ns (f(XIN)=16MHZ, VCC=3.0V to 3.6V) 142.9ns (f(XIN)=7MHZ, VCC=2.4V to 3.6V without software wait)

? Supply voltage .....................................3.0V to 3.6V (f(XIN)=16MHZ, without software wait) 2.4V to 3.0V (f(XIN)=7MHZ, without software wait) 2.2V to 3.0V (f(XIN)=7MHZ, with software one-wait) :mask ROM version

? Low power consumption ......................34.0mW (VCC = 3V, f(XIN)=10MHZ, without software wait) 66.0mW (VCC = 3.3V, f(XIN)=16MHZ, without software wait)

? Interrupts..............................................25 internal and 8 external interrupt sources, 4 software interrupt sources; 7 levels (including key input interrupt)

? Multifunction 16-bit timer......................5 output timers + 6 input timers

? Serial I/O ..............................................5 channels (3 for UART or clock synchronous, 2 for clock synchronous)

? DMAC ..................................................2 channels (trigger: 24 sources)

? A-D converter.......................................10 bits X 8 channels (Expandable up to 18 channels)

? D-A converter.......................................8 bits X 2 channels

? CRC calculation circuit.........................1 circuit

? Watchdog timer....................................1 line

? Programmable I/O ...............................87 lines

? Input port..............................................1 line (P85 shared with NMI pin)

? Memory expansion ..............................Available (to 4M bytes)

? Chip select output ................................4 lines

? Clock generating circuit .......................2 built-in clock generation circuits (built-in feedback resistor, and external ceramic or quartz oscillator)

Applications

Audio, cameras, office equipment, communications equipment, portable equipment