LV5680NPVC-XH集成電路（IC）的特殊用途穩壓器規格書PDF中文資料

LV5680NPVC-XH屬于集成電路（IC）的特殊用途穩壓器。由安森美半導體公司制造生產的LV5680NPVC-XH特殊用途穩壓器該系列產品用于電源控制、某種形式的轉換，適用于特定的復雜應用。因此，各種產品特性集差異較大，包括空燃比傳感器接口、汽車交流發電機電壓調節、DDR 端接、液體透鏡控制、摩托車轉向信號控制、熱電 (peltier) 冷卻器控制、壓電觸覺控制、閥門控制、小型發動機管理等。

Overview

The LV5680NPVC is a multi-power supply system IC that provides four regulator outputs and two high side switches as well as a number of protection functions including overcurrent protection, overvoltage protection and overheat protection. It is an optimal power supply IC for car audio and car entertainment systems and similar products.

Features

? Four regulator output systems

For microcontroller: 5.0V output voltage, 200mA maximum output current

For CD drive: 8.0V output voltage, 1300mA maximum output current

For illumination: 8 to 12V output voltage (output can be set with external resistors), 300mA maximum output current

For audio systems: 8 to 9V output voltage (output voltage can be set with external resistors), 300mA maximum output current

? Two VCC-linked high side switch systems

EXT: 350mA maximum output current, 0.5V voltage difference between input and output.

ANT: 300mA maximum output current, 0.5V voltage difference between input and output.

? Two VDD 5V-linked high side switch systems

SW5V: 200mA maximum output current, 0.2V voltage difference between input and output.

ACC (accessory voltage detection output): 100mA maximum output current, 0.2V voltage difference between input and output.

? Overcurrent protection function

? Overvoltage protection function, typ 21V (excluding VDD 5V output)

? Overheat protection function, typ 175oC

? On-chip accessory voltage detection circuit

? P-channel LDMOS used for power output block

(Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the conditions out of safety range or ratings. Use of the IC such as use under over current protection range or thermal shutdown state may degrade the IC’s reliability and eventually damage the IC.