LT4356-3中文資料凌力爾特?cái)?shù)據(jù)手冊(cè)PDF規(guī)格書

DESCRIPTION

The LTC?4364 surge stopper with ideal diode controller

protects loads from high voltage transients. It limits and

regulates the output during an overvoltage event, such

as load dump in automobiles, by controlling the voltage

drop across an external N-channel MOSFET pass device.

The LTC4364 also includes a timed, current limited circuit

breaker. In a fault condition, an adjustable fault timer must

expire before the pass device is turned off. The LTC4364-1

latches off the pass device while the LTC4364-2 automatically

restarts after a delay. The LTC4364 precisely monitors

the input supply for overvoltage (OV) and undervoltage

(UV) conditions. The external MOSFET is held off in undervoltage

and auto-retry is disabled in overvoltage.

An integrated ideal diode controller drives a second MOSFET

to replace a Schottky diode for reverse input protection

and output voltage holdup. The LTC4364 controls the

forward voltage drop across the MOSFET and minimizes

reverse current transients upon power source failure,

brownout or input short.

FEATURES

- Wide Operating Voltage Range: 4V to 80V

- Withstands Surges Over 80V with VCC Clamp

- Adjustable Output Clamp Voltage

- Ideal Diode Controller Holds Up Output Voltage During Input Brownouts

- Reverse Input Protection to –40V

- Reverse Output Protection to –20V

- Overcurrent Protection

- Low 10μA Shutdown Current at 12V

- Adjustable Fault Timer

- 0.1 Retry Duty Cycle During Faults (LTC4364-2)

- Available in 4mm × 3mm 14-Lead DFN, 16-Lead MSOP, and 16-Lead SO Packages

APPLICATIONS

- Automotive/Avionic Surge Protection

- Hot Swap/Live Insertion

- Redundant Supply ORing

- Output Port Protection