LOG200_V01中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Ultra-fast transient response to low current levels:

– Settling time for 10nA to 100nA step:

240ns rising, 620ns falling (typ)

– Settling time for 100nA to 1μA step:

60ns rising, 150ns falling (typ)

? Wide dynamic range: 10pA to 10mA (180dB)

– Specified from 100pA to 10mA (160dB)

? High signal bandwidth:

– 20MHz at 10μA to 10mA

– 6.3MHz at 1μA

– 90kHz at 1nA

? High-accuracy transfer function:

– 0.2% max log conformity error (10nA to 100μA)

? Integrated reference current (1μA) and reference

voltages (2.5V and 1.65V)

? Additional auxiliary high-speed op amp for

differential ADC drive, single-ended gain or filter

blocks, and other peripheral functions

? Single supply (4.5V to 12.6V) or

dual supply (±2.25V to ±6.3V) operation

? Specified temperature range: –40°C to +125°C

? Small package options:

– 3mm × 3mm VQFN

– 1.6mm x 1.6mm DSBGA (Preview)

2 Applications

? Optical modules

? Inter-DC interconnect

? Optical network terminal unit

? Chemistry/gas analyzer

? Erbium-doped fiber optic amplifier (EDFA)

3 Description

The LOG200 is a wide-dynamic-range current-tovoltage

amplifier specifically designed to optimize

current measurements across 160dB of dynamic

range with unparalleled accuracy and speed

for optical communications, medical diagnostics,

and industrial process-control measurements. The

LOG200 features two logarithmic amplifiers followed

by a high-accuracy differential amplifier that convert

current signals into a voltage representing the logcompressed

ratio of the two currents. The current

inputs are designed to feature a high-speed response

from one input, and a highly accurate reference

signal on the other input, allowing for a unique

combination of fast transient response and high

logarithmic conformity.

The LOG200 ratio is internally set to 250mV/

decade of current-to-voltage conversion. The device

integrates an uncommitted high-speed amplifier to

allow the output to be configured for differential or

filtered responses, with a fast settling time to drive

successive approximation analog-to-digital converters

(SAR ADCs). The LOG200 also features a separate

reference current and reference voltage designed to

configure the device for optimized input current and

common-mode voltages.

The LOG200 can be powered in a single-supply

(4.5V to 12.6V) or dual-supply (±2.25V to ±6.3V)

configuration and is specified from –40°C to +125°C.