L99SM81V集成電路（IC）的電機驅動器控制器規格書PDF中文資料

L99SM81V屬于集成電路（IC）的電機驅動器控制器。由意法半導體集團制造生產的L99SM81V電機驅動器，控制器產品屬于電機驅動器和控制器電源管理集成電路 (PMIC) 系列，可用于控制或操作從某電源施加到電機或相關機電執行器的電源。所實現的具體功能和特性集根據預期負載和預期應用的特性有很大差異，范圍從用于有刷電機的簡單開環速度控制到基于步進電機的高級閉環運動控制。

Features

? AEC-Q100 qualified

? Stepper motor driver with up to 1.35 A

current capability

? Programmable Step mode:

? Full step, Half step, Mini step, 1/8 Micro

step, 1/16 Micro step

? Current regulation by integrated PWM

control with fully integrated current sensing

? Equivalent 10 bit resolution on current

regulation loop:

? Two 4-bit programmable full scale

current amplitudes: one for RUN and

one for HOLD mode

? 6-bit DAC for reference current

generation (whatever programmed full

scale amplitude)

? 4 programmable decay modes:

? Slow-mode, mixed-mode and 2x

automatically selected decay-modes

? 3x programmable inputs for direct control of

step clock, direction, hold and step modes

? 1x programmable analog output for Tj

measurement or band-gap reference

? 2x programmable digital outputs for

internally generated PWM ON duty cycles,

error signals, coils voltage measurement

synchronization signals

? Programmable MOSFETs switching speed:

four options for EMC and power dissipation

trade-off optimization

? PWM frequency wobbling for reduction of

conducted EM energy

? Outputs protection and diagnosis (open

load, short to battery, short to GND)

? Integrated ADC for coil voltage

measurement and stall detection

? 5 V low drop voltage regulator short-circuit

protected

? Very low current consumption in standby

mode (typ. 10 μA)

? Thermal warning and shutdown

? ST SPI 4.1 interface for control and

diagnostics

Description

The L99SM81V is an automotive grade

integrated driver for bipolar two-phase stepper

motors capable of current controlled microstepping

with programmable amplitude. The

device features a 5 V voltage regulator to supply

external sensors.

The integrated Serial Peripheral Interface (SPI)

makes it possible to adjust device parameters,

control all operating modes and read out

diagnostic information. Digital I/Os are also

optionally usable for more flexible and reliable

application control.

Applications

Bipolar 2 phase stepper motor driver for

automotive applications like adaptive front light

systems or projectors for head-up displaying