L99MOD54XP集成電路（IC）的專用IC規格書PDF中文資料

L99MOD54XP屬于集成電路（IC）的專用IC。由意法半導體集團制造生產的L99MOD54XP專用 IC專用專用集成電路 (IC) 或芯片設計用于執行特定功能。這個類別包括可尋址開關、空芯儀表驅動器、音視頻開關、驗證芯片、自動放電、時鐘發生器、彩色掃描儀，以及各種應用所用的其他許多集成電路。

Features

? AEC-Q100 qualified

? Three half bridges for

0.75 A loads (RDSon = 1600 mΩ?

? Two configurable high-side drivers for up to

1.5 A load (R DSon = 500 mΩ??or? 0.35 A load

(RDSon = 1800 mΩ)

? One high-side driver for 6 A load

(R DSon = 100 mΩ)

? Programmable soft start function to drive loads

with higher inrush currents (i.e. current > 6 A,

current > 1.5 A)

? Very low current consumption in standby mode

(IS < 6 μA typ; Tj ??85 °C)

? All outputs short circuit protected

? Current monitor output for high-side OUT1,

OUT4, OUT5 and OUT6

? All outputs over temperature protected

? Open-load diagnostic for all outputs

? Overload diagnostic for all outputs

? PWM control of all outputs

Description

The L99MOD54XP is a microcontroller-driven multifunctional actuator driver for automotive applications.

Up to two DC motors and three grounded resistive loads can be driven with three half bridges and three high-side drivers.

The integrated SPI controls all operating modes (forward, reverse, brake and high impedance).

Also all diagnostic information is available via SPI read.

Applications

L99MOD devices are recommended for those applications that need multiple motors control with additional loads in high-side configuration, such as bulbs/LEDs or requiring protected supply, like sensors or cameras.