L9369集成電路（IC）的線性穩壓器控制器規格書PDF中文資料

L9369屬于集成電路（IC）的線性穩壓器控制器。由意法半導體集團制造生產的L9369穩壓器 - 線性 + 開關此產品族中的產品用于構建執行 DC-DC 轉換或電壓調節功能的電路，采用的是開關模式和線性穩壓器功能的組合。雖然具體的拓?fù)涓鞑幌嗤?，但此類產品的主要目的是將開關模式技術的效率優勢與線性穩壓技術的低噪聲特性結合在一起。

Features

? AEC-Q100 qualified

? Functional safety concept for ISO26262

compliance

? 4 High-side and Low-side gate pre-drivers for 8

external power NFETs

? Overcurrent protection with programmable

thresholds

? Programmable and NFET independent

thresholds for VDS monitoring

? 10 integrated Fully differential amplifiers with

low offset, very precise gain, and self-test

? 10 separate ADC channels for digital

processing of motor current and voltage

measurement

? 32-bits - 10 MHz SPI with CRC for internal

setting, self-test and diagnostics

? Full drive of external power NFETs down to

5.5 V battery input voltage

? Monitoring on Main power supply and

continuous BIST for internal regulators

? Double Bandgap reference

? 4 General Purpose I/O stages (GPIO)

? Button Interface (9 configurable I/O pins) for

monitoring and diagnostics in Normal and

Sleep Mode.

? 2 Motor Speed Sensors (MSS) interfaces to

acquire speed information feedbacks via

external Hall sensors.

? System wake-up in Sleep Mode

? Watchdog (configurable via SPI)

Description

The L9369 targets the specific application of

electric parking braking, suitable for system

configuration in cable-puller or Motor Gear Unit

(MGU).

The cores are two H-bridge driver stages to drive

8 external FETs for the rear wheels brakes

actuators. The stages are fully driven and

configurable via SPI, also in PWM control mode

and protected against overcurrent, with drainsource

and gate-source voltages monitoring.

A synchronized motor voltages and currents

acquisition, is performed via full differential

amplifiers with programmable and precise gain

and low offset and 10 ADC sigma-delta

modulators.

Two configurable HS/LS stages are present with

programmable output voltage to drive LED arrays,

with feedforward regulation.

2 Motor Speed Sensor interfaces (MSS) are

available to acquire position feedback from brake

actuators (shared with Lamp driver stage and

GPIO).

The set of the interfaces is completed by 4 GPIO

(General Purpose I/O) pins and a button interface

allows to manage specific customer requirements

from Electronic parking braking (EPB) button

console both in Normal and Sleep Mode.