L4953G集成電路（IC）的特殊用途穩壓器規格書PDF中文資料

L4953G屬于集成電路（IC）的特殊用途穩壓器。由意法半導體集團制造生產的L4953G特殊用途穩壓器該系列產品用于電源控制、某種形式的轉換，適用于特定的復雜應用。因此，各種產品特性集差異較大，包括空燃比傳感器接口、汽車交流發電機電壓調節、DDR 端接、液體透鏡控制、摩托車轉向信號控制、熱電 (peltier) 冷卻器控制、壓電觸覺控制、閥門控制、小型發動機管理等。

DESCRIPTION

The L4953G contains a triple voltage regulator and a power switch.

The IC includes a monitoring circuit to warn if a low voltage or no voltage condition is occuring.

In stand-by output is active as long as possible even when in thermal shutdown or any other fault conditions.

The STCAP pin allows the use of a reserve supply capacitor that will hold enough energy for the 5V Stand-byline to allow the μP to store data.

■ 3 OUTPUTS:

9.2V (500mA);

5V (1A);

5V (100mA) STANDBY

■ OUT1 (9.2V) AND OUT2 (5V) WITH INDEPENDENT ENABLE CONTROL FOR STAND BY MODE

■ 2A HIGH SIDE DRIVER WITH CLAMPED OUTPUT (16V)

■ LOGIC OUTPUT FOR:

– SUPPLY UNDERVOLTAGE (LVW)

– OVERVOLTAGE

– THERMAL PROTECTION

■ RESET FUNCTION

■ IGNITION COMPARATOR

■ REVERSE BATTERY AND LOAD DUMP PROTECTION

■ THERMAL SHUTDOWN