The 1Gb DDR2 SDRAM is organized as a 16Mbit x 8 I/Os x 8banks or 8Mbit x 16 I/Os x 8 banks device. This synchronous device achieves high speed double-data-rate transfer rates of up to 800Mb/sec/pin (DDR2-800) for general applications.

The chip is designed to comply with the following key DDR2 SDRAM features such as posted CAS with additive latency, write latency = read latency - 1, Off-Chip Driver(OCD) impedance adjustment and On Die Termination.

Key Features

? JEDEC standard 1.8V ± 0.1V Power Supply

? VDDQ = 1.8V ± 0.1V

? 200 MHz fCK for 400Mb/sec/pin, 267MHz fCK for 533Mb/sec/pin, 333MHz fCK for 667Mb/sec/pin, 400MHz fCK for 800Mb/sec/pin

? 8 Banks

? Posted CAS

? Programmable CAS Latency: 3, 4, 5, 6

? Programmable Additive Latency: 0, 1, 2, 3, 4, 5

? Write Latency(WL) = Read Latency(RL) -1

? Burst Length: 4 , 8(Interleave/nibble sequential)

? Programmable Sequential / Interleave Burst Mode

? Bi-directional Differential Data-Strobe (Single-ended data strobe is an optional feature)

? Off-Chip Driver(OCD) Impedance Adjustment

? On Die Termination

? Special Function Support

- PASR(Partial Array Self Refresh)

- 50ohm ODT

- High Temperature Self-Refresh rate enable

? Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95 °C

? All of Lead-free products are compliant for RoHS