ISL6121HIB集成電路（IC）的電源控制器監(jiān)視器規(guī)格書PDF中文資料

The ISL6121 is a single supply Overcurrent (OC) fault

protection IC for 2.5V to 5V applications where 2A current

limiting is desired. This device features internal current

monitoring and limiting along with a 50m? integrated power

switch and a current limited time out to latch-off feature for

system protection. The time to latch-off is independent of

device temperature, and magnitude of OC.

Each ISL6121 incorporates in a 8 lead SOIC package a

50m? N-channel MOSFET power switch for power control.

The switch is driven by a constant current source giving a

controlled ramp up of the output voltage. This provides a soft

start turn-on eliminating bus voltage drooping caused by inrush current while charging heavy load capacitances.

(Enable high (ISL6121H) and enable low (ISL6121L) options

are) available with a fault reporting output compatible with 3V

and 5V logic level signals allowing for external control and

monitoring.

The Under Voltage (UVLO) lockout feature prevents turn-on

of the output unless the correct ENABLE signal and VIN >

2.5V are both present. During initial turn-on the ISL6121

design prevents a fault from being presented by blanking the

fault signal, unlike other vendor devices needing additional

external circuitry to accomplish this. Rising and falling

output is a current-limited voltage ramp so that both the

inrush current and voltage slew rate are limited,

independent of load. This reduces supply droop due to

surge and eliminates the need for external EMI filters.

During operation once an OC condition is detected the

output is current limited to 2A to allow for a transient

condition to pass. If still in current limit after the current limit

period has elapsed the output is latched off and the fault is

reported by pulling the FAULT low. The FAULT signal is

latched low until reset by the enable signal being deasserted

at which time the FAULT signal will clear.

Features

? 0.05? Integrated Power N-channel MOSFET Switch

? Accurate Current Sensing and Limiting

? 12ms Timed Fault Latch-Off, No thermal Dependency

? 2.5V to 5.5V Operating Range

? Under Voltage Lockout

? Disabled Output Internally Pulled Low

? Controlled Turn On/Off Ramp Times

? Fault Output Signal

? Logic Level Enable High Inputs (ISL6121H) or Enable Low

Inputs (ISL6121L)

? Logic Level Compatible Enable Input and Fault Output

? Pb-Free Available (RoHS Compliant)

Applications

? Fibre Channel

? Industrial Power Control

? Hot Plug