ISL1550集成電路（IC）的電信規(guī)格書PDF中文資料

The ISL1550 is a dual operational amplifier intended to be

used as a differential line driver. ISL1550’s high bandwidth

and low distortion performance enables the support of VDSL2

8b, 17a and 30a modem applications.

This device features a high current drive capability of ±750mA

required to drive large voltage peaks into heavy loads. In

Central Office (CO) applications, the driver achieves a typical

Missing Band Power Ratio (MBPR) of -66dBc in VDSL2 8b

upstream (US) 1 band and MBPR’s of -61dBc and -60dBc in

VDSL2 17a US1 and US2 respectively.

The ISL1550 has two bias current control pins (C0, C1) to allow

for four power settings (disable, low, medium, high). The VDSL

modem DSP configures the line driver’s power setting based

on the desired mode of operation. The line driver operates on a

nominal single +12V or a dual ±6V supplies with bias current

in active mode between 15mA to 32mA, depending on its

power setting. The ISL1550’s gain setting is configurable at

the application level by setting the Rf and Rg resistor values.

The surge current handling of ISL1550 has been enhanced to

allow ITU-T K.20 and GR1089 compliance with minimal

external surge protection circuitry.

The ISL1550 is available in the thermally-enhanced, Pb-free

RoHS compliant 16 Ld QFN package and is specified for

operation over the full -40°C to +85°C temperature range.

Features

? 20dBm output power capability

? Drives up to ±750mA from a +12V supply

? 18VP-P differential output drive into 20Ω

? -89dBc typical driver output distortion at full output at

200kHz, 12VP-P differential

? -61dBc US1, -60dBc US2 avg. MBPR 17a

? Supply range: ±4.0V to ±6.6V, +8.0V to +13.2V

? Thermal shutdown

? K.20, GR-1089 Surge Robustness Validated

Applications

? VDSL2 Profiles: 8MHz, 17MHz, and 30MHz