IMXRT1040CEC中文資料恩智浦?jǐn)?shù)據(jù)手冊(cè)PDF規(guī)格書

1.1

Features

The i.MX RT1040 processors are based on Arm Cortex-M7 Core Platform, which has the following features:

?

Supports single Arm Cortex-M7 Core with:

—

32 KB L1 Instruction Cache

—

32 KB L1 Data Cache

—

Full featured Floating Point Unit (FPU) with support of the VFPv5 architecture

—

Support the Armv7-M Thumb instruction set

?

Integrated MPU, up to 16 individual protection regions

?

Tightly coupled GPIOs, operating at the same frequency as Arm Core

?

Up to 512 KB I-TCM and D-TCM in total

?

Frequency of 600 MHz

?

Cortex M7 CoreSight? components integration for debug

?

Frequency of the core, as per Table 9.

The SoC-level memory system consists of the following additional components:

?

Boot ROM (128 KB)

?

On-chip RAM (512 KB)

—

512 KB OCRAM shared between ITCM/DTCM and OCRAM

?

External memory interfaces:

—

8/16-bit SDRAM, up to SDRAM-133/SDRAM-166

—

8/16-bit SLC NAND FLASH, with ECC handled in software

—

SD/eMMC

—

SPI NOR/NAND FLASH

—

Parallel NOR FLASH with XIP support

—

Two single/dual channel Quad SPI FLASH with XIP support

?

Timers and PWMs:

—

Two General Programmable Timers (GPT)

?

4-channel generic 32-bit resolution timer for each

?

Each support standard capture and compare operation

—

Four Periodical Interrupt Timers (PIT)

?

Generic 32-bit resolution timer

?

Periodical interrupt generation

Four Quad Timers (QTimer)

?

4-channel generic 16-bit resolution timer for each

?

Each support standard capture and compare operation

?

Quadrature decoder integrated

Four FlexPWMs

?

Up to 8 individual PWM channels per each

?

16-bit resolution PWM suitable for Motor Control applications

Four Quadrature Encoder/Decoders