DESCRIPTION

The IDT72T4088/72T4098/72T40108/72T40118 are exceptionally deep, extremely high speed, CMOS First-In-First-Out (FIFO) memories with the ability to read and write data on both rising and falling edges of clock. The device has a flexible x40/x20/x10 Bus-Matching mode and the option to select single or double data rates for input and output ports. These FIFOs offer several key user benefits:

? Flexible x40/x20/x10 Bus-Matching on both read and write ports

? Ability to read and write on both rising and falling edges of a clock

? User selectable Single or Double Data Rate of input and output ports

? A user selectable MARK location for retransmit

? User selectable I/O structure for HSTL or LVTTL

? The first word data latency period, from the time the first word is written to an empty FIFO to the time it can be read, is fixed and short.

? High density offerings up to 5Mbit

? 10Gbps throughput

FEATURES

? Choose among the following memory organizations:

IDT72T4088 ― 16,384 x 40

IDT72T4098 ― 32,768 x 40

IDT72T40108 ― 65,536 x 40

IDT72T40118 ― 131,072 x 40

? Up to 250MHz operating frequency or 10Gbps throughput in SDR mode

? Up to 110MHz operating frequency or 10Gbps throughput in DDR mode

? Users selectable input port to output port data rates, 500Mb/s Data Rate

-DDR to DDR

-DDR to SDR

-SDR to DDR

-SDR to SDR

? User selectable HSTL or LVTTL I/Os

? Read Enable & Read Clock Echo outputs aid high speed operation

? 2.5V LVTTL or 1.8V, 1.5V HSTL Port Selectable Input/Ouput voltage

? 3.3V Input tolerant

? Mark & Retransmit, resets read pointer to user marked position

? Write Chip Select (WCS) input enables/disables Write Operations

? Read Chip Select (RCS) synchronous to RCLK

? Programmable Almost-Empty and Almost-Full flags, each flag can default to one of four preselected offsets

? Dedicated serial clock input for serial programming of flag offsets

? User selectable input and output port bus sizing

-x40 in to x40 out

-x40 in to x20 out

-x40 in to x10 out

-x20 in to x40 out

-x10 in to x40 out

? Auto power down minimizes standby power consumption

? Master Reset clears entire FIFO

? Partial Reset clears data, but retains programmable settings

? Empty and Full flags signal FIFO status

? Select IDT Standard timing (using EF and FF flags) or First Word Fall Through timing (using OR and IR flags)

? Output enable puts data outputs into High-Impedance state

? JTAG port, provided for Boundary Scan function

? 208 Ball Grid array (PBGA), 17mm x 17mm, 1mm pitch

? Easily expandable in depth and width

? Independent Read and Write Clocks (permit reading and writing simultaneously)

? High-performance submicron CMOS technology

? Industrial temperature range (-40°C to +85°C) is available